Repair Metallic Epoxy Flooring in Jacksonville

By | February 10, 2022

Metallic epoxy flooring in Jacksonville is an excellent option for many homeowners. It has the appearance of ceramic tile without the hassle and mess that can come with it. Metallic epoxy floors are very durable and easy to maintain, but there are some things you should know before you install them in your home or business. In this article, we will go over how to repair epoxy and what steps need to be taken during maintenance, so they last for years.



  1. How to Repair Damaged Epoxy Flooring

If you need to repair your metallic epoxy flooring in Jacksonville, it shouldn’t be that difficult. Some basic steps should be followed to fix the problem so it doesn’t come back later. Here’s how to do it:


  1. Clean the Damaged Area

If there is an area that has been damaged, you will want to clean it off. This can be done with water and a brush, so the area is nice and clean before starting the repair process. We suggest you remove any rugs or other items in the immediate area, so you have plenty of room to work around the epoxy flooring irrespective of whether you need commercial floors and industrial coatings.


  1. Mix up the epoxy

When you have to repair the epoxy, it might be a good idea to mix up more than you need. That way, if there is any spillage or overflow, it won’t make too much of a mess.


  1. Apply the epoxy

The next step would be to apply some of the fresh mixtures on top of the damaged area. You don’t need to spread it out very far as you’ll be covering it shortly with some sand.


  1. Add Sand

Next, apply some sand on top of the epoxy that was just applied and let it dry.


  1. Polish the Floor

We recommend that once it’s dried, you can start polishing the entire floor again. This should restore a uniform look to the epoxy flooring and make your fix barely noticeable. At epoxy flooring Jacksonville you will be glad to find both commercial floors and industrial coatings that suit your needs.


  1. How To Maintain Metallic Epoxy Flooring in Jacksonville

After you have finished installing the flooring throughout your home or business, there are some simple steps you can take to keep things looking nice for years to come. Here’s how:


  1. Keep Away from Edges

It is important to keep your epoxy flooring away from the edges of walls. If it comes into contact with moisture at all, you can start to see some problems develop with cracking and chipping, which will need to be repaired by someone experienced with epoxy floors.


  1. Avoid Spills or Leaks

As mentioned before, if there are any spills on your floor, they should be cleaned right away. The same goes for water leaks, as this is one of the most common reasons an epoxy floor gets damaged.


  1. Keep it Clean

A little bit of water here and there won’t cause much damage at all, but grime and dirt on top of that could lead to some serious problems. You want to sweep or dust mop the floors regularly to keep them looking good.


That’s all there is to it. It might seem like a lot of work, but the best way to maintain epoxy flooring is by keeping it clean. If you do that, your floors will be just fine, and no maintenance will even be necessary in most cases. We offer both commercial floors and industrial coatings.



Metallic Epoxy flooring in Jacksonville can be an excellent solution for many homeowners, but make sure you work with the right people to install it. With a little bit of maintenance and some simple repairs, your epoxy floors will be just fine.